Tag Archives: 767

FAA AD 2015-15-06 / Boeing 767

SUMMARY: We are superseding Airworthiness Directive (AD) 2003-13-01 for certain The Boeing Company Model 767 airplanes. AD 2003-13-01 required an inspection to detect cracks and fractures of the outboard hinge fitting assemblies on the trailing edge of the inboard main flap, and follow-on and corrective actions if necessary. For certain airplanes, AD 2003-13-01 required an inspection to determine if a tool runout option has been performed in the area. This new AD reduces certain compliance times, adds airplanes to the applicability, and provides optional terminating action for certain inspections. This AD was prompted by reports of hinge assembly fractures found before certain required compliance times in AD 2003-13-01. We are issuing this AD to prevent the inboard aft flap from separating from the wing and potentially striking the airplane, which could result in damage to the surrounding structure and potential personal injury.

Apex Inspections NDT Seal

Apex Inspections NDT

FAA AD 2015-15-06

FAA AD 2015-19-12 Boeing 767 – Fuselage Skin

This AD was prompted by reports that six fasteners may not have been installed in the left and right stringer 37 (S-37) between body stations (BS) 428 and 431 lap splices on certain airplanes. We are issuing this AD to detect and correct missing fasteners, which could result in cracks in the fuselage skin that could adversely affect the structural integrity of the airplane. Open Hole Eddy Current of 6 fasteners

FAA AD 2015-19-12